---
# WPA2-PSK takes an 8-63 character passphrase, or exactly 64 hex characters as a
# precomputed key. NetworkManager stores a shorter one without complaint --
# psk-flags stays 0 and the value sits in the keyfile -- and then refuses to
# activate with "Secrets were required, but not provided", which reads like a
# missing password rather than an invalid one.
#
# For the rescue AP that failure is invisible until the day the home network is
# down and this is the only way in, so it is checked here instead. Only lengths
# are reported, never the values.
- name: check the Wi-Fi secrets are usable as WPA2-PSK
  ansible.builtin.assert:
    that:
      - (vars[item] | length >= 8 and vars[item] | length <= 63)
        or (vars[item] is match('^[0-9a-fA-F]{64}$'))
    fail_msg: >-
      {{ item }} is {{ vars[item] | length }} characters, which WPA2 will not
      accept. Use an 8-63 character passphrase, or a 64-character hex
      precomputed key. Fix it with `make vault`.
    quiet: true
  # The loop carries the variable NAME, never its value: a failed assert prints
  # the item it was iterating over, so looping over the secrets themselves would
  # dump both passwords to the terminal on any failure.
  loop:
    - stickah_psk
    - stickah_psk_rescue
  tags: [labelprint, wifi]

# The watchdog can pull the radio out from under this very play if it decides
# the Pi is offline while we are mid-deploy over the rescue AP. The hold expires
# on its own after {{ labelprint_hold_max_age_secs }}s, so an aborted run cannot
# leave the watchdog disabled.
- name: hold the radio for the duration of this deploy
  become: true
  ansible.builtin.file:
    path: /run/wifi-rescue.hold
    state: touch
    owner: root
    group: root
    mode: "0644"
  changed_when: false
  tags: [labelprint, wifi]

- name: install the home Wi-Fi profile
  become: true
  ansible.builtin.template:
    src: home-wifi.nmconnection.j2
    dest: /etc/NetworkManager/system-connections/home-wifi.nmconnection
    owner: root
    group: root
    mode: "0600"
  notify: reload networkmanager connections
  tags: [labelprint, wifi]

- name: install the rescue access point profile
  become: true
  ansible.builtin.template:
    src: rescue-ap.nmconnection.j2
    dest: /etc/NetworkManager/system-connections/rescue-ap.nmconnection
    owner: root
    group: root
    mode: "0600"
  notify: reload networkmanager connections
  tags: [labelprint, wifi]

# ---------------------------------------------------------------------------
# Coexisting with netplan
# ---------------------------------------------------------------------------
# The hand-built image configures Wi-Fi through cloud-init's network-config, and
# on Raspberry Pi OS trixie netplan's NetworkManager integration turns that into
# a persistent profile of its own at /etc/netplan/90-NM-<uuid>.yaml -- not the
# /etc/netplan/50-cloud-init.yaml you would expect, and not something a
# cloud-init clean removes.
#
# That profile is deliberately left in place. It carries the same SSID as
# home-wifi, and autoconnect-priority decides between them: 100 here against
# netplan's 0, so NetworkManager picks ours every time. What netplan's copy buys
# is a fallback that predates anything in this role -- if home-wifi is ever
# rendered wrong, the Pi still comes back on the LAN instead of stranding itself
# on the rescue AP. Its PSK goes stale when the home password changes; that
# costs nothing, because a stale profile simply fails and ours is tried first.
#
# What is worth stopping is cloud-init rewriting the network on a future
# re-instance, which would put a third opinion in play.
- name: stop cloud-init from rewriting the network config
  become: true
  ansible.builtin.copy:
    dest: /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
    content: |
      network: {config: disabled}
    owner: root
    group: root
    mode: "0644"
  tags: [labelprint, wifi]

# ---------------------------------------------------------------------------
# The watchdog
# ---------------------------------------------------------------------------
- name: install the Wi-Fi rescue watchdog
  become: true
  ansible.builtin.template:
    src: wifi-rescue.sh.j2
    dest: /usr/local/sbin/wifi-rescue
    owner: root
    group: root
    mode: "0755"
  tags: [labelprint, wifi]

- name: install the Wi-Fi rescue units
  become: true
  ansible.builtin.template:
    src: "{{ item }}.j2"
    dest: "/etc/systemd/system/{{ item }}"
    owner: root
    group: root
    mode: "0644"
  loop:
    - wifi-rescue.service
    - wifi-rescue.timer
  notify: reload systemd
  tags: [labelprint, wifi]

- name: apply pending unit changes
  ansible.builtin.meta: flush_handlers
  tags: [labelprint, wifi]

- name: enable the Wi-Fi rescue watchdog
  become: true
  ansible.builtin.systemd:
    name: wifi-rescue.timer
    enabled: true
    state: started
  tags: [labelprint, wifi]